Arquivos Probes | Someh Projetos, Produtos e Serviços

CHILDREN SAFETY TEST PROBE 3.5 A 4.5 YEARS TYPE CONE – 60335-2-24 UL FIGURE 101.DVA.1

Adon Editor — Thu, 03 Oct 2019 02:16:53 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER SPECIFICATIONS:

Hilt engineering plastic
Made of stainless
UL 60335-2-24 Dimensions Figure 101.DVA.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE 3.5 A 4.5 YEARS TYPE CONE – 60335-2-24 UL FIGURE 101.DVA.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN SAFETY TEST PROBE 3.5 A 4.5 YEARS – 60335-2-24 UL FIGURE 101.DVA.1

Adon Editor — Thu, 03 Oct 2019 02:15:04 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER SPECIFICATIONS:

Hilt engineering plastic
Made of stainless
UL 60335-2-24 Dimensions Figure 101.DVA.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE 3.5 A 4.5 YEARS – 60335-2-24 UL FIGURE 101.DVA.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PROBE ARTICULADA – UL 1082 FIGURE 7.2

Adon Editor — Thu, 03 Oct 2019 02:13:09 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER SPECIFICATIONS:

Hilt engineering plastic
Made of stainless
Dimensions figure 7.2 UL 1082
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post PROBE ARTICULADA – UL 1082 FIGURE 7.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN SAFETY TEST PROBE 10.5 A 11.5 TYPE CONE YEARS – UL 60335-2-24 FIGURE 101.DVA.2

Adon Editor — Thu, 03 Oct 2019 02:11:33 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER SPECIFICATIONS:

Hilt engineering plastic
Made of stainless
UL 60335-2-24 Dimensions Figure 101.DVA.2
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE 10.5 A 11.5 TYPE CONE YEARS – UL 60335-2-24 FIGURE 101.DVA.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN SAFETY TEST PROBE WITH ARM – EN 13683 FIGURE 5

Adon Editor — Thu, 03 Oct 2019 02:08:29 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Dimensions Figure 5 according to EN 13683
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE WITH ARM – EN 13683 FIGURE 5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN SAFETY TEST PROBE – UL 1017 FIGURE 25

Adon Editor — Thu, 03 Oct 2019 02:06:35 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Dimensions UL 1017 Figure 25
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE – UL 1017 FIGURE 25 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN SAFETY TEST PROBE 10.5 A 11.5 YEARS – UL 60335-2-24 FIGURE 101.DVA.2

Adon Editor — Thu, 03 Oct 2019 02:03:02 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
UL 60335-2-24 Dimensions Figure 101.DVA.2
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN SAFETY TEST PROBE 10.5 A 11.5 YEARS – UL 60335-2-24 FIGURE 101.DVA.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 1017

Adon Editor — Thu, 03 Oct 2019 01:58:34 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 1017
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 1017 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 1741

Adon Editor — Thu, 03 Oct 2019 01:57:30 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 1741
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 1741 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 60065

Adon Editor — Thu, 03 Oct 2019 01:56:03 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 60065
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 60065 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 474

Adon Editor — Thu, 03 Oct 2019 01:54:45 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 474
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 474 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 1310

Adon Editor — Thu, 03 Oct 2019 01:53:33 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 1310
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 1310 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 1062

Adon Editor — Thu, 03 Oct 2019 01:52:24 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 1062
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 1062 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 1278

Adon Editor — Thu, 03 Oct 2019 01:51:14 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 1278
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 1278 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 982

Adon Editor — Thu, 03 Oct 2019 01:50:01 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 982
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 982 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 60950 FIGURE EE.3

Adon Editor — Thu, 03 Oct 2019 01:48:36 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 60950 Figure Ee.3
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 60950 FIGURE EE.3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 507

Adon Editor — Thu, 03 Oct 2019 01:24:11 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 507
RBC dimensional calibration (OPTIONAL)

6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 507 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – PA100A

Adon Editor — Thu, 03 Oct 2019 01:22:44 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions as PA100A
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – PA100A apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – IEC 62368 FIGURE V.1

Adon Editor — Thu, 03 Oct 2019 01:19:27 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions IEC 62368 Figure V.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – IEC 62368 FIGURE V.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø25,4 MM – UL 60335-1 FIGURE 1DV

Adon Editor — Thu, 03 Oct 2019 01:14:59 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø25,4 mm
Dimensions UL 60335-1 Figure 1DV
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø25,4 MM – UL 60335-1 FIGURE 1DV apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST WIRE Ø1 MM – IEC 61242 FIGURE 2

Adon Editor — Thu, 03 Oct 2019 01:01:46 +0000

The device is used to verify the non-accessibility of live parts roller extensions on the spool with increased protection.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of steel
hard chrome finish
system with spring for force application
Probe ø1 mm
Dimensions Figure 2 according to IEC 61242
RBC dimensional calibration (OPTIONAL)
RBC calibration force (OPTIONAL)
6 months warranty

O post TEST WIRE Ø1 MM – IEC 61242 FIGURE 2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PROBE “B” – IEC 60745-2-5 FIGURE 110

Adon Editor — Thu, 03 Oct 2019 00:57:59 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø12 mm
Dimensions IEC 60745-2-5 Figure 110
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post PROBE “B” – IEC 60745-2-5 FIGURE 110 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PROBE “A” – IEC 60745-2-5 FIGURE 105

Adon Editor — Thu, 03 Oct 2019 00:56:16 +0000

The device is used to check accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Made of stainless
Probe ø12 mm
Dimensions IEC 60745-2-5 Figure 105
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post PROBE “A” – IEC 60745-2-5 FIGURE 105 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PROBE – IEC 60745-2-11 FIGURE 101

Adon Editor — Thu, 03 Oct 2019 00:54:17 +0000

The device is used to check the contact of the saw with the probe.

PARAMETER TECHNICAL

Made of stainless
IEC 60745-2-11 Dimensions Figure 101
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post PROBE – IEC 60745-2-11 FIGURE 101 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FOOT PROBE – EN 60335-2-2 FIGURE Z101

Adon Editor — Thu, 03 Oct 2019 00:52:17 +0000

The device is used to check the side machinery spaces that are subject to access by foot to avoid contact of the same with the inside of the machine to avoid any accident.

PARAMETER TECHNICAL

Foot manufactured in stainless
Leg manufactured in Wood
dimensions according to EN 60335-2-2 Figure Z101
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FOOT PROBE – EN 60335-2-2 FIGURE Z101 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FOOT PROBE – UL 82 FIGURE 2.2

Adon Editor — Thu, 03 Oct 2019 00:50:45 +0000

The device is used to check the side machinery spaces that are subject to access by foot to avoid contact of the same with the inside of the machine to avoid any accident.

PARAMETER TECHNICAL

Foot manufactured in stainless
Leg manufactured in Wood
Dimensions figure 82 2.2 UL
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FOOT PROBE – UL 82 FIGURE 2.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FOOT PROBE – IEC 60335-2-92 FIGURE 103

Adon Editor — Thu, 03 Oct 2019 00:49:15 +0000

The device is used to check the side machinery spaces that are subject to access by foot to avoid contact of the same with the inside of the machine to avoid any accident.

PARAMETER TECHNICAL

Foot manufactured in stainless
Leg manufactured in Wood
IEC 60335-2-92 Dimensions Figure 103
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FOOT PROBE – IEC 60335-2-92 FIGURE 103 apareceu primeiro em Someh Projetos, Produtos e Serviços.

IMPACT ELEMENT FOR IMPACT PENDULUM – IEC 60068-2-75

Adon Editor — Thu, 03 Oct 2019 00:47:29 +0000

The device is used to reset the pendulum impact testing machine.

PARAMETER TECHNICAL

Made of stainless
IEC 60068-2-75 Dimensions Table 1
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post IMPACT ELEMENT FOR IMPACT PENDULUM – IEC 60068-2-75 apareceu primeiro em Someh Projetos, Produtos e Serviços.

DENTAL ENGINE LOAD FAN – IEC 80601-2-60 FIGURE AA.4

Adon Editor — Thu, 03 Oct 2019 00:45:25 +0000

The device is used to apply a load on the dental engines.

PARAMETER TECHNICAL

Rod steel with hard chrome
aluminum Fans
According to IEC 80601-2-60 Figure AA.4
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post DENTAL ENGINE LOAD FAN – IEC 80601-2-60 FIGURE AA.4 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 60335-1 ITEM 20.2

Adon Editor — Thu, 03 Oct 2019 00:43:42 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Finger stainless steel
Grip and stop face on engineering plastic
cable with electrical connector
20.2 According to IEC 60335-1 item
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 60335-1 ITEM 20.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60320 FIGURE 21

Adon Editor — Thu, 03 Oct 2019 00:41:29 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions IEC 60320 Figure 21
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60320 FIGURE 21 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 1 JOULE 0.14 – VDE 0620

Adon Editor — Thu, 03 Oct 2019 00:40:07 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions VDE 0620
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 1 JOULE 0.14 – VDE 0620 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60598-1

Adon Editor — Thu, 03 Oct 2019 00:38:31 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions IEC 60598-1
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60598-1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60745-1

Adon Editor — Thu, 03 Oct 2019 00:37:05 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions IEC 60745-1
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60745-1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60335-1 ITEM 21.1

Adon Editor — Thu, 03 Oct 2019 00:35:10 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions IEC 60335-1 item 21.1
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60335-1 ITEM 21.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60065

Adon Editor — Thu, 03 Oct 2019 00:33:32 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
Dimensions IEC 60065
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60065 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60068-2-75 FIGURE E.1

Adon Editor — Wed, 02 Oct 2019 23:15:45 +0000

The device is used to measure the resistance of surfaces that are impacted in common usage.

PARAMETER TECHNICAL

tube with Ø50mm
Power Options from 0.14 to 1 Joule
IEC 60068-2-75 Dimensions Figure E.1
RBC dimensional calibration (OPTIONAL)
RBC Power Calibration (OPTIONAL)
6 months warranty

O post SPRING HAMMER TEST APPARATUS 0.14 A 1 JOULE – IEC 60068-2-75 FIGURE E.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

IMPACTOR – IEC 60601-2-52 FIGURE BB.2

Adon Editor — Wed, 02 Oct 2019 23:13:40 +0000

The device is used to determine the impact resistance of hospital beds, the test simulates normal use.

PARAMETER TECHNICAL

Made of steel
Finish electrolytic zinc
springs for pre – loading
IEC 60601-2-52 Dimensions Figure BB.2
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post IMPACTOR – IEC 60601-2-52 FIGURE BB.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

LOADING PAD – IEC 60601-2-52 FIGURE 201 104

Adon Editor — Wed, 02 Oct 2019 23:11:33 +0000

The device is used to determine the resistance force of hospital beds, the test simulates normal use.

PARAMETER TECHNICAL

Made of steel
Finish electrolytic zinc
IEC 60601-2-52 Dimensions Figure 201.103b
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post LOADING PAD – IEC 60601-2-52 FIGURE 201 104 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CYLINDER TOOL – IEC 60601-2-52 FIGURE 201.103B

Adon Editor — Wed, 02 Oct 2019 23:09:16 +0000

The device is used to determine accessibility to dangerous parts of hospital bed.

PARAMETER TECHNICAL

Made of steel
Finish electrolytic zinc
Mass 3.340 kg
IEC 60601-2-52 Dimensions Figure 201.103b
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post CYLINDER TOOL – IEC 60601-2-52 FIGURE 201.103B apareceu primeiro em Someh Projetos, Produtos e Serviços.

CONE TOOL – IEC 60601-2-52 FIGURE 201.103A

Adon Editor — Wed, 02 Oct 2019 23:07:28 +0000

The device is used to determine accessibility to dangerous parts of hospital bed.

PARAMETER TECHNICAL

Made of aluminum
Mass 5.130 kg
IEC 60601-2-52 Dimensions Figure 201.103a
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post CONE TOOL – IEC 60601-2-52 FIGURE 201.103A apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø56 – IEC 60335-2-64 ITEM 20.2

Adon Editor — Wed, 02 Oct 2019 23:05:24 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Finger stainless steel
Grip and stop face on engineering plastic
Distance finger to the stop face 120 mm
Stop face with ø56mm
cable with electrical connector
According to IEC 60335-2-64 20.2 item
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø56 – IEC 60335-2-64 ITEM 20.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE Ø125 – IEC 60335-2-14 ITEM 20.2

Adon Editor — Wed, 02 Oct 2019 23:03:32 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Finger stainless steel
Grip and stop face on engineering plastic
cable with electrical connector
According to IEC 60335-2-14 20.2 item
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE Ø125 – IEC 60335-2-14 ITEM 20.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GLASS BREAKER – IEC 60335-2-24 ITEM 22.116

Adon Editor — Wed, 02 Oct 2019 23:01:32 +0000

The device is used to determine the breaking of glass used for glass panels accessibility.

PARAMETER TECHNICAL

Made of stainless steel
tungsten Tip
75 g mass
Point angle 60 °
22 116 According to IEC 60335-2-24 item
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post GLASS BREAKER – IEC 60335-2-24 ITEM 22.116 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FLAT TEST ROD Ø76 MM – IEC 60335-2-16 ITEM 22.102

Adon Editor — Wed, 02 Oct 2019 22:59:33 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Drum Stainless
of size Ø76 mm cylinder
According to IEC 60335-2-16 Item 22102
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FLAT TEST ROD Ø76 MM – IEC 60335-2-16 ITEM 22.102 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PROBE Ø150 MM – IEC 60335-2-82

Adon Editor — Wed, 02 Oct 2019 22:57:48 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Made plastic engineering
ball with Ø150 mm
According to IEC 60335-2-82
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BALL PROBE Ø150 MM – IEC 60335-2-82 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PROBE Ø75MM – IEC 60335-2-89

Adon Editor — Wed, 02 Oct 2019 22:56:17 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Made plastic engineering
O75 mm ball with
According to IEC 60335-2-89
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BALL PROBE Ø75MM – IEC 60335-2-89 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PROBE Ø100 MM – IEC 60335-2-91 ITEM 22:40

Adon Editor — Wed, 02 Oct 2019 22:54:39 +0000

The device is used to determine accessibility to dangerous parts.

PARAMETER TECHNICAL

Made plastic engineering
ball with ø100 mm
According to IEC 60335-2-91 item 22:40
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BALL PROBE Ø100 MM – IEC 60335-2-91 ITEM 22:40 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN TEST FINGER PROBE Ø8,6 – EN 60071 FIGURE 16

Adon Editor — Wed, 02 Oct 2019 22:52:03 +0000

The device is used to determine the accessibility of children to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Finger stainless
ø8,6
cable with electrical connector
According to EN 60071 Figure 16
According to IEC 61032 test Figure 12. Calibrator 18
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN TEST FINGER PROBE Ø8,6 – EN 60071 FIGURE 16 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN TEST FINGER PROBE Ø8,6 – IEC 61032 FIGURE 12

Adon Editor — Wed, 02 Oct 2019 22:50:06 +0000

The device is used to determine the accessibility of children to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Finger stainless
ø8,6
cable with electrical connector
According to IEC 61032 test Figure 12. Calibrator 18
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN TEST FINGER PROBE Ø8,6 – IEC 61032 FIGURE 12 apareceu primeiro em Someh Projetos, Produtos e Serviços.

CHILDREN TEST FINGER PROBE Ø5,6 – IEC 61032 FIGURE 13

Adon Editor — Wed, 02 Oct 2019 22:48:28 +0000

The device is used to determine the accessibility of children to dangerous parts.

PARAMETER TECHNICAL

Hilt engineering plastic
Finger stainless
Ø5,6
cable with electrical connector
According to IEC 61032 Figure 13 – Test Calibrator 19
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post CHILDREN TEST FINGER PROBE Ø5,6 – IEC 61032 FIGURE 13 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GAUGES FOR LAMPS – IEC 60061-3

Adon Editor — Wed, 02 Oct 2019 22:46:56 +0000

The device is used to assess the dimensions of the finished lamps.

PARAMETER TECHNICAL

Made of aluminum or stainless
As IEC 60061-3
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post GAUGES FOR LAMPS – IEC 60061-3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRAY NOZZLE AND IPX3 IPX4 – IEC 60598

Adon Editor — Wed, 02 Oct 2019 22:44:59 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL The device is used to determine the degree of protection . products waterproof :

Hilt engineering plastic
Nozzle type shower
Drill according to standard
Gauge
Flow control valve
Engage hose ½ ”
IEC 60598
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPRAY NOZZLE AND IPX3 IPX4 – IEC 60598 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRAY NOZZLE IPX3 IPX4 – IEC 60335-1 ITEM 15.1.1

Adon Editor — Wed, 02 Oct 2019 22:43:20 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
Nozzle type shower
Drill according to standard
Gauge
Flow control valve
Engage hose ½ ”
IEC 60335-1 item 15.1.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPRAY NOZZLE IPX3 IPX4 – IEC 60335-1 ITEM 15.1.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPRAY NOZZLE IPX3 IPX4 – IEC 60529 ITEM 14.2.3 AND 14.2.4

Adon Editor — Wed, 02 Oct 2019 22:41:08 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
Nozzle type shower
Drill according to standard
Gauge
Flow control valve
Engage hose ½ ”
IEC 60529 item 14.2.3 and 14.2.4
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPRAY NOZZLE IPX3 IPX4 – IEC 60529 ITEM 14.2.3 AND 14.2.4 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JET NOZZLE TEST DEVICE GAUGE IPX5 AND IPX6 – IEC 60598 FIGURE 8

Adon Editor — Wed, 02 Oct 2019 22:39:07 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
stainless steel nozzles and ø6,3 ø12,5mm
Gauge
Engage hose ½ ”
Dimensions IEC 60598 figure 8
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JET NOZZLE TEST DEVICE GAUGE IPX5 AND IPX6 – IEC 60598 FIGURE 8 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JET NOZZLE TEST DEVICE IPX5 AND IPX6 – EN 60950

Adon Editor — Wed, 02 Oct 2019 22:37:19 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
stainless steel nozzles and ø6,3 ø12,5mm
Gauge
Engage hose ½ ”
dimensions according to EN 60950
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JET NOZZLE TEST DEVICE IPX5 AND IPX6 – EN 60950 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JET NOZZLE TEST DEVICE IPX5 AND IPX6 – IEC 60335-1 ITEM 15.1.1

Adon Editor — Wed, 02 Oct 2019 22:35:43 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
stainless steel nozzles and ø6,3 ø12,5mm
Gauge
Engage hose ½ ”
Dimensions IEC 60335-1 item 15.1.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JET NOZZLE TEST DEVICE IPX5 AND IPX6 – IEC 60335-1 ITEM 15.1.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JET NOZZLE TEST DEVICE IPX5 AND IPX6 – IEC 60529 ITEM 14.2.5 AND 14.2.6

Adon Editor — Wed, 02 Oct 2019 22:33:13 +0000

The device is used to determine the degree of protection products waterproof.

PARAMETER TECHNICAL

Hilt engineering plastic
stainless steel nozzles and ø6,3 ø12,5mm
Gauge
Engage hose ½ ”
Dimensions IEC 60529 item 14.2.5 and 14.2.6
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JET NOZZLE TEST DEVICE IPX5 AND IPX6 – IEC 60529 ITEM 14.2.5 AND 14.2.6 apareceu primeiro em Someh Projetos, Produtos e Serviços.

HEIGHT MEASUREMENT JIG – IEC 60695-11-5

Adon Editor — Wed, 02 Oct 2019 22:31:33 +0000

The device is used to reset the needle flame testing machine.

PARAMETER TECHNICAL

Made of stainless
Accessory IEC 60695-11-5
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post HEIGHT MEASUREMENT JIG – IEC 60695-11-5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

NEEDLE POINT Ø0,5MM – IEC 60695-11-5 FIGURE 1A

Adon Editor — Wed, 02 Oct 2019 22:29:31 +0000

The device is used to reset the needle flame testing machine.

PARAMETER TECHNICAL

Made Brass
tube with internal ø0,5mm
Accessory IEC 60695-11-5 Figure 1a
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post NEEDLE POINT Ø0,5MM – IEC 60695-11-5 FIGURE 1A apareceu primeiro em Someh Projetos, Produtos e Serviços.

STANDARD COPPER PIN – IEC 60695-11-5 FIGURE A.1

Adon Editor — Wed, 02 Oct 2019 22:27:31 +0000

The device is used to reset the needle flame testing machine.

PARAMETER TECHNICAL

Made on copper
Accessory IEC 60695-11-5 Figure A.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post STANDARD COPPER PIN – IEC 60695-11-5 FIGURE A.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PLATINUM ELECTRODE – IEC 60112

Adon Editor — Wed, 02 Oct 2019 22:25:38 +0000

The device is used to reset the threshing testing machine.

PARAMETER TECHNICAL

Made platinum
Accessory IEC 60112

O post PLATINUM ELECTRODE – IEC 60112 apareceu primeiro em Someh Projetos, Produtos e Serviços.

THERMOCOUPLE TYPE K – IEC 60695-2-10 / IEC 60695-11-5

Adon Editor — Wed, 02 Oct 2019 21:51:19 +0000

The device is used for replacement in the glow wire test machine and draws needle.

PARAMETER TECHNICAL

Type K
cable 1 meter
Accessory IEC 60695-2-10
Accessory IEC 60695-11-5

O post THERMOCOUPLE TYPE K – IEC 60695-2-10 / IEC 60695-11-5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GLOW WIRE TEST – SASO 443 FIGURE 4 AND 5

Adon Editor — Wed, 02 Oct 2019 21:48:25 +0000

The device is used for replacement in the glow wire test machine.

PARAMETER TECHNICAL

Made in nickel / chromium (80/20)
O1 mm thermocouple hole for
443 SASO dimensions as Figure 4 and 5
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post GLOW WIRE TEST – SASO 443 FIGURE 4 AND 5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GLOW WIRE TEST – IEC 60884 ITEM 28.1.1

Adon Editor — Wed, 02 Oct 2019 21:39:31 +0000

The device is used for replacement in the glow wire test machine.

PARAMETER TECHNICAL

Made in nickel / chromium (80/20)
O1 mm thermocouple hole for
Dimensions IEC 60884 item 28.1.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post GLOW WIRE TEST – IEC 60884 ITEM 28.1.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GLOW WIRE TEST – IEC 60335-1

Adon Editor — Wed, 02 Oct 2019 21:37:51 +0000

The device is used for replacement in the glow wire test machine.

PARAMETER TECHNICAL

Made in nickel / chromium (80/20)
O1 mm thermocouple hole for
Dimensions IEC 60335-1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post GLOW WIRE TEST – IEC 60335-1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

GLOW WIRE TEST – IEC 60695-2-10

Adon Editor — Wed, 02 Oct 2019 21:36:29 +0000

The device is used for replacement in the glow wire test machine.

PARAMETER TECHNICAL

Made in nickel / chromium (80/20)
O1 mm thermocouple hole for
IEC 60695-2-10 Dimensions
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post GLOW WIRE TEST – IEC 60695-2-10 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IS 1293 FIGURE 27

Adon Editor — Wed, 02 Oct 2019 21:34:36 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions Figure 27 as IS 1293
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IS 1293 FIGURE 27 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – SASO 443 FIGURE 3

Adon Editor — Wed, 02 Oct 2019 21:32:59 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions Figure 3 as SASO 443
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – SASO 443 FIGURE 3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 62368 ITEM 5.4.1.10

Adon Editor — Wed, 02 Oct 2019 21:31:34 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions IEC 62368 item 5.4.1.10
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 62368 ITEM 5.4.1.10 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 60730 FIGURE 6

Adon Editor — Wed, 02 Oct 2019 21:30:26 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions Figure 6 according to IEC 60730
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 60730 FIGURE 6 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 60335-1 ITEM 30.1

Adon Editor — Wed, 02 Oct 2019 21:28:44 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions IEC 60335-1 item 30.1
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 60335-1 ITEM 30.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – BS 1363 FIGURE 24

Adon Editor — Wed, 02 Oct 2019 21:26:56 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
dimensions as Figure 24 BS 1363
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – BS 1363 FIGURE 24 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE- VDE 0620 FIGURE 36

Adon Editor — Wed, 02 Oct 2019 21:25:16 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions VDE 0620 Figure 36
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE- VDE 0620 FIGURE 36 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 60884 FIGURE 37

Adon Editor — Wed, 02 Oct 2019 21:22:09 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions Figure 7 IEC 60884
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 60884 FIGURE 37 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 61558 FIGURE 5

Adon Editor — Wed, 02 Oct 2019 21:20:00 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions Figure 5 IEC 61558
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 61558 FIGURE 5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 60320 FIGURE 23

Adon Editor — Wed, 02 Oct 2019 21:18:21 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions IEC 60320 Figure 23
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 60320 FIGURE 23 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PRESSURE – IEC 60695-10-2

Adon Editor — Wed, 02 Oct 2019 21:16:24 +0000

The device is used for pressure resistance test and exposed plastic surfaces, the surfaces must resist the pressure caused by the device at a certain temperature according to the standard.

PARAMETER TECHNICAL

Made of stainless
Spherical tip R of 2.5 mm
Weight 20 C
Base ø50 mm x 100
Dimensions IEC 60695-10-2
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post BALL PRESSURE – IEC 60695-10-2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

PROBE ZERO – IEC 60065

Adon Editor — Wed, 02 Oct 2019 21:14:00 +0000

The device is used to test for resistance to abrasion against the pin sample.

PARAMETER TECHNICAL

Made of stainless
Dimensions IEC 60065
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post PROBE ZERO – IEC 60065 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SCRATCHING PIN PROBE – UL 250 FIGURE SA 5.1

Adon Editor — Wed, 02 Oct 2019 21:11:03 +0000

The device is used to test for resistance to abrasion against the pin sample.

PARAMETER TECHNICAL

Made of steel
Surface treatment of hard chrome
Dimensions UL SA 5.1 250 Figure
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SCRATCHING PIN PROBE – UL 250 FIGURE SA 5.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SCRATCHING PIN PROBE – IEC 60335-2-24 FIGURE 102

Adon Editor — Wed, 02 Oct 2019 21:09:04 +0000

The device is used to test for resistance to abrasion against the pin sample.

PARAMETER TECHNICAL

Made of steel
Surface treatment of hard chrome
IEC 60335-2-24 Dimensions Figure 102
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SCRATCHING PIN PROBE – IEC 60335-2-24 FIGURE 102 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPLASH TEST – IEC 60335-2-64 FIGURE 101

Adon Editor — Wed, 02 Oct 2019 21:06:26 +0000

The device is used for the moisture resistance test.

PARAMETER TECHNICAL

Made of engineering plastic
Stainless Container
Gauge
control valve
IEC 60335-2-64 Dimensions Figure 101
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPLASH TEST – IEC 60335-2-64 FIGURE 101 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST LOAD – IEC 60335-2-9 FIGURE 101

Adon Editor — Wed, 02 Oct 2019 21:03:52 +0000

The device is used to verify the broach load resistance when used.

PARAMETER TECHNICAL

Made of steel
Finish electrolytic zinc
knob for setting the spit
Dimensions IEC 60335-2-9 Figure 101
RBC dimensional calibration (OPTIONAL)
RBC mass calibration (OPTIONAL)
6 months warranty

O post TEST LOAD – IEC 60335-2-9 FIGURE 101 apareceu primeiro em Someh Projetos, Produtos e Serviços.

ROD PROBE – IEC 61032 FIGURE 14

Adon Editor — Wed, 02 Oct 2019 21:01:35 +0000

The device is used to check the protection has access to hazardous mechanical parts crusher equipment food waste.

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions IEC 61032 Figure 14 – Test Calibrator 31
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post ROD PROBE – IEC 61032 FIGURE 14 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPHERE PROBE Ø40MM – IEC 60691

Adon Editor — Wed, 02 Oct 2019 20:57:55 +0000

The device is used for accessibility check hazardous parts.

PARAMETER TECHNICAL

Made of engineering plastic
Stainless Steel Ball
Dimensions IEC 60691
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPHERE PROBE Ø40MM – IEC 60691 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SPHERE PROBE Ø100MM – IEC 60691

Adon Editor — Wed, 02 Oct 2019 20:55:39 +0000

The device is used for accessibility check hazardous parts.

PARAMETER TECHNICAL

Made of engineering plastic
Stainless Steel Ball
Dimensions IEC 60691
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SPHERE PROBE Ø100MM – IEC 60691 apareceu primeiro em Someh Projetos, Produtos e Serviços.

HAZARDOUS LIVE PARTS PROBE Ø4 MM – IEC 60601-1 ITEM 8.4.2 D

Adon Editor — Wed, 02 Oct 2019 20:52:34 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool.

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions Item 8.4.2 IEC 60601-1 d)
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post HAZARDOUS LIVE PARTS PROBE Ø4 MM – IEC 60601-1 ITEM 8.4.2 D apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST HOOK – IEC 60601-1 ITEM 5.9.2.2

Adon Editor — Wed, 02 Oct 2019 20:45:14 +0000

The device is used to determine the accessibility of people to dangerous parts.

PARAMETER TECHNICAL

Made of stainless
Dimensions IEC 60601-1 item 5.9.2.2
Dimensions IEC 60065-1 Figure 4
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST HOOK – IEC 60601-1 ITEM 5.9.2.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FINGERNAIL PROBE – IEC 60730 FIGURE 3

Adon Editor — Wed, 02 Oct 2019 20:42:33 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1015-001

PARAMETER TECHNICAL

Made of engineering plastic
Nail stainless
cable with electrical connector
Force Measurement System
Dimensions Figure 3 IEC 60730
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FINGERNAIL PROBE – IEC 60730 FIGURE 3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FINGERNAIL PROBE – UL 1083

Adon Editor — Wed, 02 Oct 2019 20:40:54 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1015-001

PARAMETER TECHNICAL

Made of engineering plastic
Nail stainless
cable with electrical connector
Force Measurement System
Dimensions UL 1083
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FINGERNAIL PROBE – UL 1083 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FINGERNAIL PROBE – IEC 60745-1 FIGURE 7

Adon Editor — Wed, 02 Oct 2019 20:39:24 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1015-001

PARAMETER TECHNICAL

Made of engineering plastic
Nail stainless
cable with electrical connector
Force Measurement System
Dimensions IEC 60745-1 Figure 7
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FINGERNAIL PROBE – IEC 60745-1 FIGURE 7 apareceu primeiro em Someh Projetos, Produtos e Serviços.

FINGERNAIL PROBE – IEC 60335-1 FIGURE 7

Adon Editor — Wed, 02 Oct 2019 20:37:37 +0000

The device is used to determine the accessibility of people to dangerous parts.

PARAMETER TECHNICAL

Made of engineering plastic
Nail stainless
cable with electrical connector
Force Measurement System
Dimensions Figure 7 IEC 60335
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post FINGERNAIL PROBE – IEC 60335-1 FIGURE 7 apareceu primeiro em Someh Projetos, Produtos e Serviços.

DEVICE FOR STROKE TEST – IEC 60335-2-24 ITEM 15.102

Adon Editor — Wed, 02 Oct 2019 20:35:22 +0000

The device is used to perform the test pouring a liquid composition as standard.

PARAMETER TECHNICAL

Made of stainless
Block displacement HDPE
Dimensions according to IEC 60335-2-24 item 15102
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post DEVICE FOR STROKE TEST – IEC 60335-2-24 ITEM 15.102 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BLENDER PROBE Ø40,0MM – IEC 60335-2-14 ITEM 20.103

Adon Editor — Wed, 02 Oct 2019 20:32:44 +0000

The device is used to check the switch acting as a force applied as reported in the standard.

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions according to IEC 60335-2-14 item 20103
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BLENDER PROBE Ø40,0MM – IEC 60335-2-14 ITEM 20.103 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BLENDER PROBE Ø8,0MM – IEC 60335-2-14 ITEM 20.102

Adon Editor — Wed, 02 Oct 2019 20:28:28 +0000

The device is used to check the possibility of contact with the blender blade when performed the test with the probe.

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions according to IEC 60335-2-14 item 20102
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BLENDER PROBE Ø8,0MM – IEC 60335-2-14 ITEM 20.102 apareceu primeiro em Someh Projetos, Produtos e Serviços.

ACCESS PROBE Ø12,0MM – IEC 62368 FIG. V.3

Adon Editor — Wed, 02 Oct 2019 20:26:19 +0000

The device is used for accessibility check hazardous parts. SOH 1012-001

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions IEC 62368 Figure V.3
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post ACCESS PROBE Ø12,0MM – IEC 62368 FIG. V.3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

ACCESS PROBE Ø12,0MM – IEC 60950 FIG. 2C

Adon Editor — Wed, 02 Oct 2019 20:24:07 +0000

The device is used for accessibility check hazardous parts.

PARAMETER TECHNICAL

Made of engineering plastic
Forward cylindrical stainless
Dimensions Figure 2C IEC 60950
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post ACCESS PROBE Ø12,0MM – IEC 60950 FIG. 2C apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST WIRE Ø1,0MM – IEC 60950 ITEM 4.6.4.2

Adon Editor — Wed, 02 Oct 2019 20:21:54 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1011-001

PARAMETER TECHNICAL

Made of engineering plastic
stainless steel cylindrical tip ø1,0mm
Dimensions IEC 60950 item 4.6.4.2
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST WIRE Ø1,0MM – IEC 60950 ITEM 4.6.4.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

ACCESS PROBE 4, 5, 6 Ø1,0MM D – IEC 60529 TABLE 6

Adon Editor — Wed, 02 Oct 2019 20:18:16 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool.

PARAMETER TECHNICAL

Made of engineering plastic
stainless steel cylindrical tip ø1,0mm
Dimensions IEC 60529 Table 6 4, 5, 6 D
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post ACCESS PROBE 4, 5, 6 Ø1,0MM D – IEC 60529 TABLE 6 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST WIRE Ø1,0MM D – IEC 61032 FIG. 4

Adon Editor — Wed, 02 Oct 2019 20:15:11 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1010-001

PARAMETER TECHNICAL

Made of engineering plastic
stainless steel cylindrical tip ø1,0mm
Dimensions IEC 61032 Figure 4 – Test Calibrator D
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST WIRE Ø1,0MM D – IEC 61032 FIG. 4 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST ROD C Ø2,5MM – IS 1293 FIGURE 5

Adon Editor — Wed, 02 Oct 2019 20:12:42 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1010-001

PARAMETER TECHNICAL

Made of engineering plastic
stainless steel cylindrical tip ø2,5mm
IS dimensions as Figure 5 1293
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST ROD C Ø2,5MM – IS 1293 FIGURE 5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST ROD C Ø2,5MM – IEC 62368 FIGURE V.5

Adon Editor — Wed, 02 Oct 2019 20:09:32 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1010-001

Technical Parameters:

Made of engineering plastic
stainless steel cylindrical tip ø2,5mm
Dimensions IEC 62368 Figure V.5
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST ROD C Ø2,5MM – IEC 62368 FIGURE V.5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST ROD C Ø2,5MM – IEC 60950

Adon Editor — Wed, 02 Oct 2019 20:06:51 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1010-001

Technical Parameters:

Made of engineering plastic
stainless steel cylindrical tip ø2,5mm
Dimensions IEC 60950
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST ROD C Ø2,5MM – IEC 60950 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST ROD 3C Ø2,5MM – IEC 60529 TABLE 6

Adon Editor — Wed, 02 Oct 2019 20:04:13 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1010-001

PARAMETER SPECIFICATIONS:

Made of engineering plastic
stainless steel cylindrical tip ø2,5mm
Dimensions IEC 60529 6 Table 3C
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST ROD 3C Ø2,5MM – IEC 60529 TABLE 6 apareceu primeiro em Someh Projetos, Produtos e Serviços.

Ø2,5MM TEST ROD PROBE C – IEC 61032 FIG. 3

Adon Editor — Wed, 02 Oct 2019 20:01:36 +0000

The device is used for accessibility check the dangerous parts, which are liable to be touched accidentally, in normal use for a tool.

Technical Parameters:

Made of engineering plastic
stainless steel cylindrical tip ø2,5mm
Dimensions IEC 61032 Figure 3 – Test Calibrator C
Dimensions IEC 60529 6 Table 3C
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post Ø2,5MM TEST ROD PROBE C – IEC 61032 FIG. 3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST THORN PROBE – IEC 61032 FIG. 16

Adon Editor — Wed, 02 Oct 2019 19:58:55 +0000

The device is used to verify the protection of persons against access hot or glowing parts.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions IEC 61032 Figure 16 – Test Calibrator 41
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST THORN PROBE – IEC 61032 FIG. 16 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – IEC 60730 FIGURE 1

Adon Editor — Wed, 02 Oct 2019 19:55:15 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use. SOH 1006-001.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions Figure 1 IEC 60730
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – IEC 60730 FIGURE 1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – UL 82 FIGURE 3.3

Adon Editor — Wed, 02 Oct 2019 19:53:04 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use. SOH 1006-001.

TECHNICAL PARAMETERS:

Made of engineering plastic
Forward cylindrical stainless
Dimensions figure 82 3.3 UL
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – UL 82 FIGURE 3.3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – 950 UL FIGURE 2B

Adon Editor — Wed, 02 Oct 2019 19:39:45 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use. SOH 1006-001.

TECHNICAL PARAMETERS:

Made of engineering plastic
Forward cylindrical stainless
Dimensions UL 950 2b
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – 950 UL FIGURE 2B apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – UL 1310 FIGURE 16.1

Adon Editor — Wed, 02 Oct 2019 19:26:09 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use. SOH 1006-001.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions Figure UL 1310 16.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – UL 1310 FIGURE 16.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – IEC 61558 FIGURE 3

Adon Editor — Wed, 02 Oct 2019 19:20:02 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use. SOH 1006-001.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions Figure 3 IEC 61558
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – IEC 61558 FIGURE 3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

SHORT TEST PIN PROBE – IEC 61032 FIG. 9

Adon Editor — Wed, 02 Oct 2019 19:18:19 +0000

The device is used to check the accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally during normal use.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions IEC 61032 Figure 9 – Test Calibrator 13
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post SHORT TEST PIN PROBE – IEC 61032 FIG. 9 apareceu primeiro em Someh Projetos, Produtos e Serviços.

LONG TEST PIN PROBE – UL 499 FIGURE 6.4

Adon Editor — Wed, 02 Oct 2019 19:16:37 +0000

The device is used to check accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally, in normal use for a tool. SOH 1005-001

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions Figure 6.4 UL 499
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post LONG TEST PIN PROBE – UL 499 FIGURE 6.4 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST PIN PROBE IEC 61032 LONG- FIG. 8

Adon Editor — Wed, 02 Oct 2019 19:13:58 +0000

The device is used to check accessibility dangerous live parts or hazardous mechanical parts, which are liable to be touched accidentally, in normal use for a tool.

Technical Parameters:

Made of engineering plastic
Forward cylindrical stainless
Dimensions IEC 61032 Figure 8 – Test Calibrator 12
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST PIN PROBE IEC 61032 LONG- FIG. 8 apareceu primeiro em Someh Projetos, Produtos e Serviços.

RIGID FINGER PROBE WITH DYNAMOMETER – IEC 61032 FIG. 7

Adon Editor — Wed, 02 Oct 2019 19:11:50 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
With dynamometer until 30N
Dimensions IEC 61032 Figure 7 – Test Calibrator 11
RBC dimensional calibration (OPTIONAL)
RBC calibration force (OPTIONAL)
6 months warranty

O post RIGID FINGER PROBE WITH DYNAMOMETER – IEC 61032 FIG. 7 apareceu primeiro em Someh Projetos, Produtos e Serviços.

RIGID FINGER PROBE – IEC 61032 FIG. 7

Adon Editor — Wed, 02 Oct 2019 19:09:50 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions IEC 61032 Figure 7 – Test Calibrator 11
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post RIGID FINGER PROBE – IEC 61032 FIG. 7 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST SPHERE PROBE – IEC 60529 TABLE 7

Adon Editor — Wed, 02 Oct 2019 19:07:48 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1009-001

Technical Parameters:

Made of stainless
ball with ø50 mm
Dimensions IEC 60529 Table 7
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST SPHERE PROBE – IEC 60529 TABLE 7 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST SPHERE PROBE – IEC 61032 FIG. 5

Adon Editor — Wed, 02 Oct 2019 19:06:11 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1009-001

Technical Parameters:

Made of stainless
ball with ø50 mm
Dimensions IEC 61032 Figure 5 – Test Calibrator 1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST SPHERE PROBE – IEC 61032 FIG. 5 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST SPHERE PROBE – IEC 60065 ITEM 12.1.3

Adon Editor — Wed, 02 Oct 2019 19:03:31 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of stainless
ball with ø50 mm
Dimensions IEC 60065 item 12.1.3
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST SPHERE PROBE – IEC 60065 ITEM 12.1.3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – UL 1017

Adon Editor — Wed, 02 Oct 2019 18:57:42 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions UL 1017
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – UL 1017 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IS 1293 FIGURE 2

Adon Editor — Wed, 02 Oct 2019 18:56:13 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions Figure 2 as IS 1293
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IS 1293 FIGURE 2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 60320 FIG. 10

Adon Editor — Wed, 02 Oct 2019 18:54:51 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions IEC 60320 Figure 10
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 60320 FIG. 10 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 60335-1 ITEM 8.1.3

Adon Editor — Wed, 02 Oct 2019 18:52:52 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions IEC 60335-1 8.1.3
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 60335-1 ITEM 8.1.3 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – UL 1278 FIGURE 8.4

Adon Editor — Wed, 02 Oct 2019 18:51:17 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions UL 1278 Figure 8.4
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – UL 1278 FIGURE 8.4 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 60950 FIG. 2A

Adon Editor — Wed, 02 Oct 2019 18:49:00 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions Figure 2A IEC 60950
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 60950 FIG. 2A apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 61010 FIGURE B.2

Adon Editor — Wed, 02 Oct 2019 18:46:06 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions Figure B.2 IEC 61010
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 61010 FIGURE B.2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 61558 FIGURE 2

Adon Editor — Wed, 02 Oct 2019 18:43:46 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions Figure 2 according to IEC 61558
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 61558 FIGURE 2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 60730 FIGURE 2

Adon Editor — Wed, 02 Oct 2019 18:41:02 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions FIGURE 2 according to IEC 60730
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 60730 FIGURE 2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – UL 1083

Adon Editor — Wed, 02 Oct 2019 18:37:59 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
Finger with ø12 mm
Cable with electrical connector
Dimensions UL 1083
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – UL 1083 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – UL 82

Adon Editor — Wed, 02 Oct 2019 18:35:21 +0000

The device is used to determine the accessibility of people to dangerous parts. SOH 1068-001

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions UL 82
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – UL 82 apareceu primeiro em Someh Projetos, Produtos e Serviços.

JOINTED FINGER PROBE – IEC 61032 FIG. 2

Adon Editor — Wed, 02 Oct 2019 18:29:50 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Finger stainless
finger with ø12 mm
cable with electrical connector
Dimensions IEC 61032 Figure 2 – Test Calibrator B
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post JOINTED FINGER PROBE – IEC 61032 FIG. 2 apareceu primeiro em Someh Projetos, Produtos e Serviços.

BALL PROBE Ø50 A – IEC 61032 TABLE 1

Adon Editor — Wed, 02 Oct 2019 18:21:39 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Stainless Steel Ball
ball with ø50 mm
Dimensions IEC 61032 TABLE 1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post BALL PROBE Ø50 A – IEC 61032 TABLE 1 apareceu primeiro em Someh Projetos, Produtos e Serviços.

TEST SPHERE PROBE WITH HANDLE Ø50 1 – IEC 60529 TABLE 6

Adon Editor — Wed, 02 Oct 2019 18:16:40 +0000

The device is used to determine the accessibility of people to dangerous parts.

Technical Parameters:

Made of engineering plastic
Stainless Steel Ball
ball with ø50 mm
Dimensions IEC 60529 Table 6
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post TEST SPHERE PROBE WITH HANDLE Ø50 1 – IEC 60529 TABLE 6 apareceu primeiro em Someh Projetos, Produtos e Serviços.

HEMISPHERIC PROBE Ø75 – NBR 13723 ITEM 7.5.1.5.3.1

Someh — Mon, 16 Sep 2019 18:47:37 +0000

The device is used to determine the accessibility stoves, checking access to dangerous parts.

TECHNICAL PARAMETERS:

Made of engineering plastic
hemispherical tip ø75mm
Dimensions according to NBR 13723 item 7.5.1.5.3.1
RBC dimensional calibration (OPTIONAL)
6 months warranty

O post HEMISPHERIC PROBE Ø75 – NBR 13723 ITEM 7.5.1.5.3.1 apareceu primeiro em Someh Projetos, Produtos e Serviços.